Amtico SF Adhesive

Write a review
£34

Amtico SF Adhesive -

A very low emissions (GEV EMICODE EC1 Plus) acrylic emulsion adhesive, which is designed to give a high bond strength, strong initial tack and a good open time.

For securing Amtico tiles on to a sound, smooth, dry subfloor of concrete including ones with a power floated surface finish; terrazzo; granolithic; sand/cement screed, smoothing underlayments, plywood and many other substrates that have been suitably prepared. Asphalt and waterproof membranes must be prepared using a minimum of 3mm of the appropriate smoothing underlayment.

Proper subfloor preparation is essential for the correct installation of any floor tiles. Subfloors must be sound, smooth, dry and free from any contaminants which will affect adhesion. Tiles, adhesive and subfloor should be allowed to stabilise to a constant temperature as close as practical to room temperature, but in all cases between 18°c and 27°c for a period of 24 hours before, during and 24 hours after installation. Tiles must be stored flat.


Available in 2 sizes - choose from the drop down menu below.